0 COMMENTS

Guide For Clamp And Cut Edge Guide Reviews With Scores

Last Update:

Our team scanned 45854 reviews before writing any suggestions for Clamp And Cut Edge Guide in this article.

Guide For Clamp And Cut Edge Guide Reviews With Scores

Read our products collection features for Clamp And Cut Edge Guide. For clamp and cut edge guide we have overlooked 45854 of reviews and created this shortlist for Clamp And Cut Edge Guide Reviews with scores. As we believe below table will help you to get Clamp And Cut Edge Guide.

NoProductScoreAction
1ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)9.8Buy On Amazon
2Johnson Level & Tool J4900 98-Inch Aluminum Cutting Guide9.8Buy On Amazon
3Bora WTX Clamp Edge 4 Pc. Set, 50” + 24” Clamp Edges + 50” Extension + Saw Plate 5434109.2Buy On Amazon
4E. Emerson Tool Co. C50 50-Inch All-In-One Contractor Straight Edge Clamping Tool Guide w/Story Stick9Buy On Amazon
550 inch ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots9Buy On Amazon
6DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24in / 62cm – Circular, Rotary, Jig, Router8.8Buy On Amazon
7Bora 50" NGX Clamp Edge, Straight Cut Guide For Circular Saws | 50" Cutting Length, 5440508.4Buy On Amazon
8Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 5430508.4Buy On Amazon
9Kreg Rip-Cut Circular Saw Guide8.4Buy On Amazon
10Big ROC ABCs Aluminum Clamp and Cut Edge Guide, 2 Piece (24" & 48")8.4Buy On Amazon

Table Of Content:

1. ProGrip Straight Edge Clamp Ideal for Cutting Large Sheets of Plywood and Dado Slots (50 inch Clamp)

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time!

2. Johnson Level & Tool J4900 98-Inch Aluminum Cutting Guide

  • High Gloss finish
  • Includes matching screws
  • Made of strong, durable scratch-resistant metal
  • Package Weight: 1.338 kilograms

3. Bora WTX Clamp Edge 4 Pc. Set, 50” + 24” Clamp Edges + 50” Extension + Saw Plate 543410

  • Set includes a saw plate, 24-inch and 50-inch Clamp edges, and a 50-inch extension that can be attached to either Clamp edge
  • Ridged aluminum straight edge guides make straight, accurate track saw like cuts
  • Clamp edge features a soft-grip, non-marring rubberized clamping pad securely grips all surfaces
  • Saw plate fits left or right handed circular saws and can be used on clamp edges up to 3-1/2 inches wide (89mm)
  • Use the saw guide with your circular saw to cut with unmatched precision, or free hand cutting with the saw plate attached
  • 45lb clamping capacity
  • Saw plate’s horizontal stop allows fast, accurate setup and placement of the power tool
  • Front fence eliminates potential side to side tool movement
  • Replaces BORA 4 pc WTX set 543400

4. E. Emerson Tool Co. C50 50-Inch All-In-One Contractor Straight Edge Clamping Tool Guide w/Story Stick

  • STRAIGHT EDGE – E. Emerson’s Contractor Series self-clamping straight edge patented design has integral tubes running the length of the wide body construction, making it ultra rigid and light to handle.
  • NO C-CLAMPING – No more C-clamping! Achieve that truly straight cut using this self-clamping straight edge to guide your tools.
  • EXTRA WIDE – This self clamping straight edge is extra wide for exceptional rigidity and has a low profile for obstruction-free cuts.
  • FLAT TOP – The extra low profile and flat top makes it easier for all circular saw or router straight cuts.
  • CONTRACTOR SERIES – Please note: recessed tracks accept Contractor Series Saw Plate, Router Plate, and Stop Block. But it will not work with A, Twin, or Ultra Series accessories.

5. 50 inch ProGrip Straight Edge Clamps Ideal for Cutting Large Sheets of Plywood and Dado Slots

  • No more c-clamps when trying to secure a straight edge to your large or small wooden panels! Cut large panels, small panels, rout straight dado’s and more! ProGrip Straight Edge Guides are not only great straight edge guides, they are super easy to align and even easier to clamp into place. Made from extruded aluminum and with the extra wide 2-3/16 inch tube rail, the ProGrip Straight Edge Guide Clamps are robust guides that are made for everyday workshop or contractor use.
  • Cut straight, true lines with circular saws, routers, trim routers, jig saws and many other power tools you probably own. These clamps are ideal for cutting large sheets of plywood in half (with a 50” straight edge guide). Each clamp is identified by the maximum clamping distance between jaws. Another great application for these clamps is cutting dado slots for bookshelves. The alignment and cutting process for dados is so much easier than ever before with the ProGrip Straight Edge Guides.
  • Each clamp rail is manufactured with a low profile to make guiding your power tool along the edge much easier. The low profile has also been designed with guide accessories in mind. The clamp rails accept many different accessories (sold separately) or can create your very own jigs and fixtures to use with the ProGrip Straight Edge Guides. Each ProGrip Straight Edge Guide has the exact same profile regardless of length.
  • How does it work? Each ProGrip Straight Edge Guide Clamp has one adjustable jaw and one fixed jaw. The fixed jaw typically will go against the edge of the board closest to you. Once you place the clamp on your board with the fixed jaw over the end, the adjustable end gets drawn in against the opposite side of the board. Once set and aligned, you secure the clamp by simply locking it down with the 3 position lock lever.
  • The lock lever on each clamp can be secured into one of three positions, each position provides varying amounts of pressure. Depending on your project or application, you may need to apply more pressure by securing the lock lever to the appropriate position. Once secured, the ProGrip Straight Edge Guide Clamp is designed to have zero side to side play with minimal deflection to provide you with the ideal straight edge to make clean, smooth cuts every time! › See more product details

6. DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24in / 62cm – Circular, Rotary, Jig, Router

  • INSTANT STRAIGHT EDGE GUIDE: When you have limited workshop space, the DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide, 24” Inch / 62cm – Circular, Rotary, Jig, Router will save you the space required for cutting/panel gluing and is capable of clamping to any parallel edge workpiece with low profile jaws that allow you to use the clamp inverted and have an unobstructed work area
  • ALL-IN-ONE: You get a smooth, straight edge and a woodworking self-clamping tool in one handy unit so you can stack glue panels without worrying about them tipping and crashing to the floor; 30.5” x 2.1” x 0.5” inches (77.5cm x 5.3cm x 1.3cm) overall dimensions (stands 1.1 inches/2.8cm tall) with 2.5” x 1” x 0.25” inch (6.4cm x 2.5cm x 0.6cm) clamp
  • BUILT TO LAST: Constructed with an aluminum body and reinforced with integral tube running the length of the wide body for maximum rigidness and lightweight handling; Wide and tall hard plastic jaws hold work piece securely and are predrilled for accessory; When clamped, this solid guide shows no play and it tightly holds its grip
  • WIDE RANGE: Scale includes both inches and centimeter measurements and is adjustable to work over the full range up to 24 inches/62cm; T-track on guide accepts standard accessories including all Pro Grip accessories and also allows complete flexibility when designing specialty fixtures in your shop; Low profile and flat top easy on a rotary saw, jig saw, circular table saw, router straight cut, or joiner cut
  • EASY TO USE: There are two clamps that hold the wood – a stationery clamp on the end with lever and a sliding clamp that moves along the rail; To adjust, pull the sliding clamp apart until you hear a click, adjust the clamp to the wood, hold the clamp against the wood and push the other part of the clamp towards the wood until it locks, make sure the stationary clamp has the handle in the upward position when adjusting and push the lever down to lock into place

7. Bora 50″ NGX Clamp Edge, Straight Cut Guide For Circular Saws | 50″ Cutting Length, 544050

  • Clamping end moves with handle for easy adjustability from one side
  • Locking handle grabs work surfaces for a secure grip that won’t budge
  • Made of heavy-gauge, rigid aluminum for extreme durability
  • Easily increase length up to 100 in. By adding the Bora NGX 50-inch aluminum extension
  • Winner of the 2019 Pro Tool Innovation Award (PTIA) in the Track Rail category

8. Bora WTX Clamp Edge and Straight Cut Guide for Circular Saws | 50 Inch Cutting Length, 543050

  • GET IT STRAIGHT – This rigid aluminum guide rail is a must-have accessory for keeping your cutting on track. Its long 50in length allows you to saw with precision and skill.
  • CONTRACTOR’S COMPANION – This tool is made for use with the Bora WTX Saw Plate (sold separately), and can be conveniently paired with your own circular saws, routers, jig saws, and other power tools.
  • LOCKED IN – The adjustable clamp end slides up and down the saw guide to fit any material being cut, especially sheets of plywood. The locking handle grabs surfaces for a secure edge that won’t budge.
  • AS LONG AS YOU NEED – Modular design allows for additional extrusions to be added which can expand the guide up to 100 inches. With the WTX clamping edge, you’ll save time and eliminate waste due to crooked, uneven cuts.

9. Kreg Rip-Cut Circular Saw Guide

  • Make rip cuts and crosscuts up to 24″ Wide
  • Cut multiple pieces to the same size With just one setup
  • Use the oversize edge guide for precise control throughout the cut
  • Eliminate need for marking, measuring, and layout lines
  • Take your saw to the material instead of having to take your material to the saw

10. Big ROC ABCs Aluminum Clamp and Cut Edge Guide, 2 Piece (24″ & 48″)

  • Sizes: 24″ & 48″
  • Ideal for woodworking.
  • Made of Aluminum
  • Easy to secure/release quick locking mechanism.
  • Large plastic handle.

Matt Cutt

Leave a Reply